Screw for metal is a very big subject. Not only there are so many different types of screws that can go into metal, there are so many types of metal screws as well. In order to know about this subject, we have to know about the screw itself.
What Different Screws Are There
Screw for metal types are categorized by the materials they are designed to connect, among other things. For example, there are wood screws, metal screws or self-tapping screws with different threads.
In the private sector, the slotted screw is the most common, but in industry, screw types with a better grip are required, such as the hexagon head screw or the Phillips head screw. Screw types can not answer the question how to attach wood to metal without screws, you can ask online or your local hardware store for that question.
Another distinguishing feature is the screw heads. There is, for example, the countersunk head and the pan head, but also the ring screw, which proves to be practical if the connection of the materials should remain flexible. Another example would be screwfix metal gates.
Differences Between Different Types Of Screws
Screw for metal types can be roughly differentiated according to what they are intended to connect. wood or metal? The classic screw is probably the wood screw. With its self-tapping double thread, it is used when pieces of wood need to be joined together quickly. It is usually made of galvanized steel and can be recognized by the yellowish or bluish coloring - the corrosion protection.
However, if you expose the screw connection to wind and weather, it is better to use stainless steel wood screws. The special feature of the chipboard screw is the low screwing resistance with high pull-out resistance - this keeps the surface of the board flawless. The best way to screw them in is with a cordless screwdriver – unlike with wood screws, pre-drilling is not necessary. If you cant use electric tools for example with screw for metal studs, you should go slow and steady by hand.
You can recognize the Screw for metal by its even thread and the cylindrical shape - it often has a nut or another counter-thread into which it is screwed. If you want to connect wood to metal, a special screw with a countersunk head and milled ribs is the screw of choice. Without pre-drilling, it rotates through the wood. As the drill bit penetrates the metal, the "wings" of the screw snap off, allowing the screw to bond firmly to the metal.
Hand Screwing Screw With Screwdriver İn Wall
The tapping screw for metal is similar to the wood screw due to its conical shape, but has a hardened special thread - and sometimes also a drill bit - which ensures a good hold in sheet metal and plastic plates of all kinds. If you don't have a drill bit, you have to pre-drill.
The term metric thread will come up again and again when buying screws. Other names for this are ISO, standard, normal or V-threads. All screws that are locked with a nut have such a thread. With it, the outer edges converge in a wedge shape so that it cannot come loose by itself. One variant is the fine thread, which has a narrower and not as deeply cut thread profile. Both types are mainly used in the processing of metal and screw for metal roof.
Choosing the right screw for metal is also important for dowelling. A countersunk, pan-head or round-head screw with a Phillips drive can be used to prevent slipping and spinning. It is important that the screw is exactly matched to the size of the anchor – as large as possible.
Different Screw Heads
Screw for metal differ not only in the drive, but also in the shape of the screw head. On the one hand, the shape of the screw head has aesthetic reasons: Countersunk screws are almost always used for wood, which are flush with the material after screwing or are countersunk so that they can be filled. Or decorative screws are used to embellish the workpiece. The lens head is also a decorative element that you can use, for example, for fittings and baseboards - it is often made of brass or has a burnished look.
The screw head of the milling head screw sinks independently into the wood via small milling burrs. The square shoulder under the head of the carriage bolt prevents this universal bolt from loosening when tightening the nut. So the screw can only be loosened from the nut side, which is why it used to be widely used in the construction of doors. But even today the carriage bolt belongs in every tool case as a universal bolt. Screw in metal hooks doesnt require this much tools or hard work.
Countersunk, Pan Head And Ring Head Screws
The hook-head screw for metal, which has a hook instead of a head, is exotic. It is screwed into a dowel by hand to hold clothesline, ceiling light and the like. There are still numerous practical developments, such as the patio screw, which has a small head so that rainwater cannot collect in it. Screw with metal anchor can be used as well but only if its stainless steel.
Comments